Loading content, please wait...
Design your own custom jersey — start now

How to Identify Your High School Volleyball Jersey Colors From an Old Yearbook or Photo

How to Identify Your High School Volleyball Jersey Colors From an Old Yearbook or Photo

There's a specific moment that brings people here.

You're flipping through a yearbook — maybe your own, maybe your daughter's, maybe one you found in a box at your parents' house — and you stop on the team photo page. There you are, number 14, mid-celebration after a tournament win, wearing a jersey in a shade of blue-green you haven't been able to track down since. You want to create a volleyball jersey that honors that exact color. Not approximately. Not "close enough." That color — the one that meant something.

The problem is that the photo you're working from is thirty years old, printed on paper that has yellowed at the edges, shot under gymnasium fluorescent lighting, and reproduced in a yearbook press run that may or may not have been color-accurate to begin with. The school's current athletic department website shows new colors that may have shifted. The original uniform supplier is probably out of business or three corporate acquisitions removed from what it was.

This guide exists for that exact moment. The process of identifying a school color from a faded photograph or yearbook print and translating it into a modern jersey order is specific enough that most guides simply never address it. By the end, you'll know how to pull usable color data from an imperfect image source, how to match it to modern fabric dye specifications, and how to verify your work before you commit to an order — so the jersey you receive actually looks like the one you wore.


Why Old Photos and Yearbooks Give You Distorted Color Data

Before you spend twenty minutes with an eyedropper tool sampling colors from a scanned photo, you need to understand why that sample will probably be off — and what to do about it.

There are four layers of color degradation between the jersey you wore and the image you're looking at right now.

Layer 1: The original photography. Sports photography from the 1980s and 1990s — especially at the high school level — was shot on film, often under gymnasium fluorescent lighting. Fluorescent light has a characteristic green shift that affects every color in the frame. That royal blue jersey may have photographed as a slightly muddy teal. That bright red may have recorded as brick.

Layer 2: The printing process. Yearbook printing historically used CMYK offset printing calibrated for readability and cost, not color accuracy. School colors in yearbook images are often reproduced at reduced saturation and slightly shifted hue to stay within the printing budget and avoid registration problems on press.

Layer 3: Paper aging. The white point of yearbook paper yellows over time. Every color in a printed photo is viewed through that yellow cast. A blue sampled from a 30-year-old yearbook page will read as slightly more yellow-shifted than the same blue on a freshly printed page — and far more yellow-shifted than the original jersey.

Layer 4: Your scanner or phone camera. When you digitize a printed image, your scanner or camera introduces its own color profile. Consumer scanners tend to oversaturate. Phone cameras apply automatic white balance correction, which can either partially compensate for the yellow cast or compound it depending on the ambient light when you shot the photo.

Understanding these four layers doesn't mean you can't get to the right color. It means you need a few additional steps that most people skip — and that's exactly what separates a jersey that looks right from one that looks close.


Step 1 — Get a Clean Digital Source Before You Sample Anything

The most common mistake in this process is sampling directly from whatever image you happen to have on hand. Before you touch a color picker, get the best possible digital source.

Here is the hierarchy of source quality, from best to worst:

  1. A yearbook scan at 600 DPI or higher, flatbed scanner — flatbed scanners have predictable, correctable color profiles and produce consistent results across the image.
  2. A direct photograph of the original jersey — if you or anyone on your old team still has the physical garment, photograph it under natural daylight (overcast is ideal — no directional shadows, no color cast from sun angle). This bypasses every layer of photographic reproduction.
  3. A team photo shot on digital camera from the same era — digital cameras from the 2000s onward have recoverable metadata and more accurate color rendering than film.
  4. A yearbook scan at 300 DPI — still usable, but less data to work with.
  5. A phone photo of a yearbook page — lowest quality, but workable if you correct the white balance before sampling.

If you're working from a phone photo of a yearbook, do this before anything else: open the image in your phone's native editor, find the white balance or color temperature control, and adjust until the white margins of the yearbook page look white — not cream, not yellow, not gray. White.

That single step removes the most significant source of color shift in phone-captured yearbook images. In our experience, this white balance correction alone moves the sampled color toward accuracy more than any other single adjustment. It takes thirty seconds. Skip it and every downstream step is calibrated to the wrong starting point.


Step 2 — Sample the Color With the Right Tool and the Right Spot

Once you have a cleaned digital source, you're ready to sample. Here is how to do it correctly.

Use a desktop tool, not a phone app. For this step, Adobe Photoshop or its free alternative GIMP will give you the most accurate results. Both tools let you use an eyedropper set to a sample radius — meaning it averages the colors in a small area rather than reading a single pixel, which may be a compression artifact.

In Photoshop: set the eyedropper to "5 by 5 average" or "11 by 11 average" under sample size. In GIMP: set the color picker to average over a 5–10 pixel radius. This matters because JPEG compression creates color noise at the pixel level — averaging eliminates that noise.

Sample from the right spot on the jersey. This is specific: sample from a flat, mid-tone area of the fabric that is not in direct highlight, not in shadow, away from number and name graphics, and as large and unobstructed as possible.

The shoulder panel or the front chest between the number and the neckline is usually ideal. Take three samples from slightly different spots in that region. If two of your three samples cluster near each other and one is an outlier, discard the outlier.

Write down the HEX code and the RGB values for your averaged sample. You'll use both in the next step.


Step 3 — Translate Your Sample Into a Real Color Standard

Your HEX code from a scanned image is not a finished answer. It's a starting point for a volleyball jersey color match. The reason: jersey fabric is dyed, not printed. The color matching system used by virtually every jersey manufacturer is Pantone PMS (Pantone Matching System), not RGB or HEX.

To translate your sample:

  1. Go to Pantone's Color Finder — enter your HEX code and it will return the closest Pantone match.
  2. Write down the top two or three closest Pantone matches. They will be very close to each other — the differences matter when you're working with fabric dye.
  3. Cross-reference with any official school color documentation you can locate.

That last step is where yearbooks become useful in a second, specific way.


Step 4 — Use Your Yearbook's Written References and Official Records to Find School Colors

Many high school yearbooks from the 1980s through the 2000s include explicit references to school colors in text — not just in photos. Check these locations:

  • The masthead or inside front cover, which sometimes lists "School Colors: [Name]"
  • The athletic section introduction, which may describe the team colors by name
  • Booster club or athletic department advertisements, which sometimes use the actual Pantone or Pantone-equivalent names
  • Senior superlatives or profile pages, where the school's official colors are sometimes named in copy

Even a color name without a Pantone number is useful. "Forest green" narrows your Pantone search dramatically compared to a raw HEX code from a faded photo. "Royal blue" tells you to look at Pantone 286 or 287, not Pantone 279, which reads as more sky blue. "Cardinal red" points toward Pantone 200 rather than Pantone 485.

If you can reach the school's current athletic department, ask specifically for the Pantone PMS number of the school's official athletic colors. Many schools have this documented even if the current uniforms use different shades — it's part of the brand standards documentation that most athletics programs maintain.

Marissa D., 34, reached out to her old high school's athletic director before ordering her reunion jersey and was emailed a one-page color standards sheet listing the exact Pantone 7694 C for the school's signature teal. That single document made her tribute jersey more accurate than anything image sampling alone could have produced.


Step 5 — How to Create a Volleyball Jersey Color Match With Modern Fabric Dye Lots

Here is where the process gets specific to how custom volleyball jerseys are actually produced.

Jersey fabric is not all dyed the same way, and not every manufacturer matches to Pantone with equal precision. When you submit a jersey order, you will typically have one of two options:

Option A: Pantone color input. Better custom jersey platforms accept a Pantone PMS number as your color specification. This is the most accurate method. Give them your PMS number and ask them to confirm the fabric dye lot they use for that specification.

Option B: Swatch selection from a pre-defined palette. Some manufacturers offer a fixed palette of available colors and you choose the closest match. Your Pantone number from the previous step tells you which swatch to select — you're matching the swatch to the PMS, not guessing by eye on a screen.

One practical note on brands: manufacturers like Under Armour volleyball jerseys and Champro volleyball jerseys both use their own proprietary color palettes for sublimated and dyed jerseys. Their catalog swatches are the reference point, and ordering from either typically means matching your identified Pantone to their closest named color. Neither is better than the other for color accuracy; they simply have different palette depths. Under Armour tends to have fewer swatch options but tighter quality control on dye lots. Champro offers a wider selection of base colors and is often more accommodating of custom Pantone matching through their dealer network.

When in doubt, request a physical swatch before committing to a full order. Reputable custom jersey platforms will send one. The screen representation of a jersey color — even on a calibrated monitor — can differ from the physical fabric by half a Pantone step in either direction. For a jersey you're building as a tribute to something you wore, that half-step matters.


Step 6 — Verify Before You Order

Before you finalize any order, run a three-point verification:

Check 1: Compare your selected swatch or Pantone to the yearbook image side by side. Hold the physical swatch against the yearbook page — or display the digital swatch next to the image on your monitor. They should feel like the same color family. If they don't, you've drifted somewhere in the process. Go back to step 3.

Check 2: See if any teammate still has the original jersey. Post in alumni groups, school reunion pages, or team reunion threads. The physical garment is the ground truth for color. If anyone has one, ask for a photo under natural daylight and compare your swatch to that image.

Check 3: Confirm number and name placement against the photo while you're at it. High school volleyball jerseys in the 1990s and early 2000s had specific placement conventions — number front and back, name across the upper back — that varied by era and by state athletic association standards. The yearbook photo shows you exactly where the number sat on the chest and how the name arced across the back. Verify layout and color in the same pass.

If all three checkpoints pass, you have as accurate a tribute jersey as the source material allows — something that will read as the jersey you wore to anyone who was there.


Your jersey is still out there waiting.

Design yours in minutes and see your name and number exactly the way you remember it.

Start Designing My Jersey


Frequently Asked Questions

How do I find school colors if my high school has rebranded since I graduated?

Start with the athletic department directly — most schools maintain color standards documentation even when they've updated the visual identity. If the current athletic department doesn't have records going back to your era, check your state's high school athletic association, which often maintains uniform standards documentation by school. Alumni associations and booster clubs sometimes have archived game programs or uniform history records that predate digital record-keeping entirely.

Can I do a volleyball jersey color match from a black-and-white yearbook photo?

A grayscale image gives you no direct color information, but it isn't a dead end. Use the black-and-white image to confirm jersey layout, number style, and design elements. For color, rely on other documentation: the yearbook's written references to school colors, alumni who have the original jersey, or the athletic department's color standards records. The color identification process in this guide depends on a color image — a grayscale photo is a layout reference, not a color source.

What if the color I identify from the photo doesn't match any standard Pantone swatch exactly?

That's expected given the four layers of color degradation described above. The goal is to get to the closest Pantone match — meaning within one or two steps on the Pantone scale — and then verify that match against any additional sources you can find: official documentation, a physical original jersey, or alumni photos. No color recovery from a faded photo will land perfectly on the original. The practical target is "recognizably the same color to anyone who wore or watched that team," which is achievable within two Pantone steps from the original.

Does fabric type affect how the final color looks, even if the Pantone number is correct?

Yes, and this is worth knowing before you order. Sublimated polyester jerseys — the most common type for custom volleyball jerseys today — tend to render colors slightly more saturated and slightly cooler than the original dyed fabric from the 1990s, which was often a heavier mesh or cotton-poly blend. If your original jersey was a cotton-poly blend, the color will look somewhat different on modern sublimated poly even if the Pantone number is identical. Requesting a swatch of the actual finished fabric before committing to a full order is the most reliable way to manage this discrepancy.

See also: personalized sports gifts that actually make a former athlete feel seen | custom softball jerseys built from your original team colors | find your old high school game film and highlight footage | jersey sizing numbers explained before you place your order

Share:

Your name. Your number. Your school colors.

Design your own custom commemorative jersey in minutes.

Start Designing
CS
Coach Shannon Tell me about the jersey you want to build.

Got it — we'll be in touch!